莞香树脂

0769-81836729

发稿时间:2017-09-13 15:09:04水性自粘胶PS-8150

水性自粘胶PS-8150

【水性自粘胶PS-8150                           
 
产品说明:
本产品是丙烯酸酯共聚合乳液,系为转贴加工而高粘之专用自粘乳胶,其不但有良好的操作性,且可应用于各种底材(如:泡棉,不织布,尼龙布等)之自粘加工。
 
物理性质:
◆外    观:       乳白液
◆固 含 量:      49.0 ± 1.0%
◆PH   值:       8.0±1
◆粘    度:    15000~30000cps/25℃
◆离 子 性:      阴/非离子性
 
接着物性:
持粘力:>2hr  (PSTC-7);     剥离力:>1.5kg/in (PSTC-1)
初粘力:<4.0cm   (PSTC-6)
测试方法:将本产品涂布在BOPP膜上,于100℃干燥3min涂得24~26um干燥厚之胶带,置地标准测试环境下30min后,再依据PSTC标准测试方法所得。
测试室温度:23±1℃;          测试室温度:65.0 ± 5.0%
BOPP膜厚:25~30um
注:以上物性系涂布于BOPP膜片上,其他材质应以实测值为准。
 
其他说明:
应 用:适用于泡棉,不织布,尼龙布。。。。。。等之自粘加工。
包装方式:200KG/桶、1000KG/胶罐或客户指定规格
 
储存要求:
储存温度:10~30℃
储存时间:六个月
 
PS-8150:Self-Attached Acrylic Resin
Product Description:
PS-8150 is a water based Acrylate combined polymer resin.lt is used for self-attach process
Manufacturing.lt is aesy to use,and suitable for variety kinds of base materials.
Specification:
Appearance:Milk white yellowish fluid;   Solid Contain:49±1% (120℃/2 hrs);
Stickiness:15000~30000 cps;              PH Number: 8±1
Technical Data:
Holding Power:>2 hrs;                    Steel Adhesion:>1.5kg/in
Lnitial Tack:<40 mm
Testing method:The tests were done based on coating this product onto BOPP film,followed by the
                PSTC standards
Room Temperature:23±1℃;                  Room Humidity:65±5%
Application:
Uses on foam,cloth,nylon materials,etc...self-attach manufacturing
Packaging:
200kg /1000kg barrel
Storage:
6 months under 10~30℃ temperature
Note on Use:
Please contact our companv technical department for more in formation
相关产品